top of page

Kizomba Connection U Group

Public·25 members
Artemy Bobylev
Artemy Bobylev

SoundGrid Rack for VENUE | Waves



Waves Soundgrid Server Software: What Is It and Why You Need It




Introduction




If you are a studio engineer, producer, or live sound engineer, you probably know how important it is to have high-quality plugins and low-latency audio processing in your workflow. Whether you are mixing, recording, mastering, or performing live, you want to have access to the best sound tools available, without compromising your system's stability or performance.




Waves Soundgrid Server Software


Download Zip: https://www.google.com/url?q=https%3A%2F%2Fblltly.com%2F2ulBAU&sa=D&sntz=1&usg=AOvVaw1RC6LNOeqBK3bKjQo05kh0



That's where Waves Soundgrid Server Software comes in. Waves Soundgrid Server Software is a software and hardware solution that allows you to run hundreds of Waves plugins in real time and ultra-low latency, using a dedicated DSP server that takes the load off your computer. You can use Waves Soundgrid Server Software with any ASIO, Core Audio, or SoundGrid audio interface, and integrate it with any DAW or console.


Waves Soundgrid Server Software has many benefits for studio and live sound applications. Here are some of them:



  • It enables you to use more plugins than your computer can handle, without affecting your system's performance or stability.



  • It reduces your system's latency to as low as 0.8 milliseconds, allowing you to monitor and record with plugins in real time.



  • It gives you access to Waves' industry-leading plugins, including emulations of classic analog hardware, cutting-edge effects, dynamics processors, EQs, reverbs, and more.



  • It allows you to create complex plugin chains and routings, using the flexible SoundGrid Studio application or the intuitive StudioRack plugin.



  • It lets you mix live shows and streams with any console, using SuperRack SoundGrid or eMotion LV1 mixer applications.



  • It lets you mix live shows with Avid VENUE consoles, using SoundGrid Rack for VENUE.



  • It lets you connect multiple computers and devices in a SoundGrid network, sharing audio and plugin processing between them.



In this article, we will explain what are the main features of Waves Soundgrid Server Software and how it works. We will also show you how to install, use, troubleshoot, and compare Waves Soundgrid Server Software with other alternatives. By the end of this article, you will have a better understanding of what Waves Soundgrid Server Software can do for you and why you need it.


How to Install Waves Soundgrid Server Software




Before you can start using Waves Soundgrid Server Software, you need to make sure that you have the following components:



  • A SoundGrid server, which is a DSP unit that runs the plugins. Waves offers several models of SoundGrid servers, such as the SoundGrid Impact Server, the SoundGrid Extreme Server, and the SoundGrid Mobile Server. You can also build your own custom server using the Waves SoundGrid Server One-C card.



  • A SoundGrid audio interface, which is a device that connects your audio sources and destinations to the SoundGrid network. Waves offers several models of SoundGrid audio interfaces, such as the DiGiGrid IOX, the DiGiGrid DLS, and the DiGiGrid MGB. You can also use any ASIO or Core Audio interface with the SoundGrid driver.



  • A SoundGrid switch, which is a network device that connects your SoundGrid server, interface, and computer. Waves offers a certified SoundGrid switch, the DiGiGrid SWS, which is recommended for optimal performance and compatibility. You can also use any standard Gigabit Ethernet switch that meets the SoundGrid specifications.



  • A computer with a compatible operating system and DAW. Waves Soundgrid Server Software supports Windows 10 64-bit and macOS 10.13.6 to 11.4. You can use any DAW that supports VST, VST3, AU, AAX, or MultiRack Native plugins.



  • A Waves account and a license for Waves Soundgrid Server Software and the plugins you want to use. You can create a free Waves account on the Waves website and purchase or rent licenses for Waves products. You can also use Waves Update Plan to get free updates and support for your products.



Once you have all the components ready, you can follow these steps to install Waves Soundgrid Server Software:



  • Download and install Waves Central, which is the application that manages your Waves products and licenses. You can download Waves Central from the Waves website.



  • Launch Waves Central and log in to your Waves account.



  • Connect your SoundGrid server to your computer using an Ethernet cable.



  • In Waves Central, go to the Install tab and select Online. Then, select the products you want to install, including Waves Soundgrid Server Software and the plugins you want to use. Click on Install to start the installation process.



  • When the installation is complete, go to the Licenses tab and select Local Licenses. Then, select your SoundGrid server from the list of devices and click on Send Licenses to transfer your licenses to your server.



  • Connect your SoundGrid audio interface and switch to your computer and server using Ethernet cables.



  • Launch your DAW and make sure it recognizes your SoundGrid audio interface as the input and output device.



  • You are now ready to use Waves Soundgrid Server Software with your DAW.



If you need to update or downgrade your SoundGrid server firmware, you can do so using the Firmware Update feature in Waves Central. To access this feature, go to the Settings tab in Waves Central and click on Firmware Update. Then, select your server from the list of devices and choose the firmware version you want to install. Click on Update Firmware to start the process.


How to Use Waves Soundgrid Server Software




Waves Soundgrid Server Software allows you to use Waves plugins in real time and ultra-low latency with any DAW or console. You can use different applications to control and manage your plugins, depending on your workflow and preferences. Here are some of the applications you can use with Waves Soundgrid Server Software:


Soundgrid Studio




Soundgrid Studio is an application that lets you create custom monitor mixes with plugins for yourself and other musicians in your studio. You can also use it to offload plugin processing from your DAW to your SoundGrid server, freeing up CPU resources and reducing latency.


To use Soundgrid Studio, you need to set up a SoundGrid network with a SoundGrid server, interface, switch, and driver. You also need to install the SoundGrid Studio application and the StudioRack plugin on your computer. You can download them from the Waves website or install them using Waves Central.


To set up a SoundGrid network, you need to follow these steps:



  • Connect your SoundGrid server, interface, switch, and computer using Ethernet cables.



  • Launch the SoundGrid driver on your computer and select your SoundGrid interface as the input and output device.



  • Launch the SoundGrid Studio application and go to the Setup tab. Here, you can configure your network settings, such as the sample rate, buffer size, clock source, and sync mode.



  • Go to the Inventory tab and make sure that your SoundGrid devices are recognized and assigned to the correct roles. You can also rename your devices and update their firmware if needed.



  • Go to the Patch tab and create your audio connections between your devices. You can use the Matrix view or the Device-to-Device view to drag and drop connections between inputs and outputs. You can also use the Auto Config feature to automatically create connections based on your device roles.



  • Go to the Mixer tab and create your monitor mixes with plugins. You can use up to eight aux channels and one master channel for each mix. You can also use the Cue Mix feature to send a separate mix to a headphone output on your interface.



To use SoundGrid Studio with your DAW, you need to follow these steps:



  • Launch your DAW and make sure it recognizes your SoundGrid interface as the input and output device.



  • Insert the StudioRack plugin on any track or bus in your DAW. StudioRack is a plugin host that lets you load up to eight Waves plugins in a single insert slot.



  • In StudioRack, click on the SoundGrid icon and select Offload Mode. This will enable you to offload the plugin processing from your DAW to your SoundGrid server.



  • Select the plugins you want to use from the Waves menu in StudioRack. You can also use presets, macros, parallel processing, and other features in StudioRack to create complex plugin chains and routings.



  • Adjust the plugin parameters and settings as you normally would in your DAW.



You can now enjoy real-time monitoring and recording with plugins in your DAW, using SoundGrid Studio and StudioRack.


SoundGrid Rack for Venue




SoundGrid Rack for Venue is an application that lets you use Waves plugins with Avid VENUE consoles for live mixing. You can use up to 128 instances of Waves plugins per console, with ultra-low latency and full recall capabilities.


To use SoundGrid Rack for Venue, you need to have a SoundGrid server, interface, switch, driver, and license. You also need to have an Avid VENUE console with a compatible software version and an option card that supports SoundGrid connectivity. You can check the compatibility and requirements on the Waves website.


To set up SoundGrid Rack for Venue, you need to follow these steps:



  • Connect your SoundGrid server, interface, switch, console, and computer using Ethernet cables.



  • Launch the SoundGrid driver on your computer and select your SoundGrid interface as the input and output device.



  • Launch the SoundGrid Inventory application on your computer and make sure that your SoundGrid devices are recognized and assigned to the correct roles. You can also rename your devices and update their firmware if needed.



  • Launch the VENUE software on your console and go to the Options > Devices page. Here, you can configure your network settings, such as the sample rate, buffer size, clock source, and sync mode.



  • Go to the Options > I/O page and assign your SoundGrid inputs and outputs to your console channels. You can use up to 64 inputs and outputs from your SoundGrid interface or network.



  • Go to the Plugins page and insert the SoundGrid Rack for Venue plugin on any channel or bus in your console. SoundGrid Rack for Venue is a plugin host that lets you load up to eight Waves plugins in a single insert slot.



  • Select the plugins you want to use from the Waves menu in SoundGrid Rack for Venue. You can also use presets, snapshots, safes, bypasses, solo links, meters, latency compensation, and other features in SoundGrid Rack for Venue to manage your plugins.



  • Adjust the plugin parameters and settings as you normally would in your console.



You can now mix live shows with Waves plugins using SoundGrid Rack for Venue and your Avid console.


SuperRack Soundgrid




SuperRack SoundGrid is an application that lets you use Waves plugins with any console for live mixing. You can use up to 128 instances of Waves plugins per rack, with ultra-low latency and full recall capabilities.


To use SuperRack SoundGrid, you need to have a SoundGrid server, interface, switch, driver, and license. You also need to have a console with an option card that supports SoundGrid connectivity. You can check the compatibility and requirements on the Waves website.


To set up SuperRack SoundGrid, you need to follow these steps:



  • Connect your SoundGrid server, interface, switch, console, and computer using Ethernet cables.



  • Launch the SoundGrid driver on your computer and select your SoundGrid interface as the input and output device.



  • Launch the SoundGrid Inventory application on your computer and make sure that your SoundGrid devices are recognized and assigned to the correct roles. You can also rename your devices and update their firmware if needed.



  • Launch the SuperRack SoundGrid application on your computer and go to the Setup page. Here, you can configure your network settings, such as the sample rate, buffer size, clock source, and sync mode.



  • Go to the I/O page and assign your SoundGrid inputs and outputs to your console channels. You can use up to 64 inputs and outputs from your SoundGrid interface or network.



  • Go to the Racks page and create your plugin racks. You can use up to 12 racks per session, each with up to 8 plugins. You can also use presets, snapshots, safes, bypasses, solo links, meters, latency compensation, and other features in SuperRack SoundGrid to manage your racks.



  • Select the plugins you want to use from the Waves menu in SuperRack SoundGrid. You can also use the Plugin Finder feature to search for plugins by name, category, or tag.



  • Adjust the plugin parameters and settings as you normally would in your console.



You can now mix live shows with Waves plugins using SuperRack SoundGrid and your console.


eMotion LV1




eMotion LV1 is an application that lets you use Waves plugins as a complete live mixing system. You can use eMotion LV1 with a touchscreen or a controller to mix up to 64 stereo channels with 16 auxes, 8 groups, 8 matrixes, 8 DCA groups, and 8 mute groups.


To use eMotion LV1, you need to have a SoundGrid server, interface, switch, driver, license, and a touchscreen or a controller. You also need to install the eMotion LV1 application and the eMo plugins on your computer. You can download them from the Waves website or install them using Waves Central.


To set up eMotion LV1, you need to follow these steps:



  • Connect your SoundGrid server, interface, switch, computer, touchscreen or controller using Ethernet cables.



  • Launch the SoundGrid driver on your computer and select your SoundGrid interface as the input and output device.



  • Launch the eMotion LV1 application on your computer and go to the Setup page. Here, you can configure your network settings, such as the sample rate, buffer size, clock source, and sync mode.



  • Go to the I/O page and assign your SoundGrid inputs and outputs to your mixer channels. You can use up to 64 stereo inputs and outputs from your SoundGrid interface or network.



  • Go to the Mixer page and create your mix with plugins. You can use up to 8 plugins per channel strip, including EQs, compressors, gates, limiters, reverbs, and more. You can also use presets, snapshots, safes, bypasses, solo links, meters, latency compensation, and other features in eMotion LV1 to manage your plugins.



  • Select the plugins you want to use from the Waves menu in eMotion LV1. You can also use the Plugin Finder feature to search for plugins by name, category, or tag.



  • Adjust the plugin parameters and settings using your touchscreen or controller. You can also use the eMo plugins to control the mixer functions, such as faders, pans, mutes, solos, sends, and more.



You can now mix live shows with Waves plugins using eMotion LV1 and your touchscreen or controller.


How to Troubleshoot Waves Soundgrid Server Software




Waves Soundgrid Server Software is designed to provide reliable and stable performance for your audio processing needs. However, sometimes you may encounter some errors or issues that may affect your workflow or sound quality. Here are some of the common errors and issues that may occur with Waves Soundgrid Server Software and how to fix them:


SoundGrid server is not recognized or offline




If your SoundGrid server is not recognized or offline in your SoundGrid application, you may need to check the following:



  • Make sure that your SoundGrid server is connected to your computer and switch using Ethernet cables.



  • Make sure that your SoundGrid server is powered on and has a green LED indicator.



  • Make sure that your SoundGrid server firmware is up to date and compatible with your SoundGrid application. You can update or downgrade your firmware using the Firmware Update feature in Waves Central.



  • Make sure that your network settings are correct and consistent across your devices. You can check and adjust your network settings in the Setup tab of your SoundGrid application.



  • Make sure that your SoundGrid server license is activated and assigned to your server. You can check and transfer your licenses in the Licenses tab of Waves Central.



  • Restart your SoundGrid application and rescan your devices in the Inventory tab.



SoundGrid audio interface is not recognized or offline




If your SoundGrid audio interface is not recognized or offline in your SoundGrid application or DAW, you may need to check the following:



  • Make sure that your SoundGrid audio interface is connected to your computer and switch using Ethernet cables.



  • Make sure that your SoundGrid audio interface is powered on and has a green LED indicator.



  • Make sure that your SoundGrid audio interface firmware is up to date and compatible with your SoundGrid application. You can update or downgrade your firmware using the Firmware Update feature in Waves Central.



  • Make sure that your network settings are correct and consistent across your devices. You can check and adjust your network settings in the Setup tab of your SoundGrid application.



  • Make sure that your SoundGrid driver is installed and selected as the input and output device in your DAW. You can install and configure the SoundGrid driver using Waves Central.



  • Restart your SoundGrid application and rescan your devices in the Inventory tab.



Sound quality issues or dropouts




If you experience sound quality issues or dropouts in your audio signal, you may need to check the following:



  • Make sure that you are not exceeding the CPU or DSP capacity of your computer or SoundGrid server. You can monitor the CPU and DSP usage in the Performance tab of your SoundGrid application. If you see any red indicators, you may need to reduce the number or complexity of your plugins, increase the buffer size, or use a more powerful server.



  • Make sure that you are not exceeding the network bandwidth of your SoundGrid network. You can monitor the network bandwidth in the Network tab of your SoundGrid application. If you see any red indicators, you may need to reduce the number or resolution of your audio channels, use a faster switch, or use a dedicated network for SoundGrid.



  • Make sure that you are not experiencing any clocking or sync issues in your SoundGrid network. You can monitor the clocking and sync status in the Clock tab of your SoundGrid application. If you see any red indicators, you may need to check your clock source, sync mode, and cable connections.



  • Make sure that you are using high-quality Ethernet cables and connectors for your SoundGrid network. You can test your cables and connectors using the Cable Test feature in the Inventory tab of your SoundGrid application. If you see any errors or warnings, you may need to replace or repair your cables or connectors.



Other errors or issues




If you encounter any other errors or issues with Waves Soundgrid Server Software that are not covered above, you may need to check the following:



  • Make sure that your software and hardware are up to date and compatible with Waves Soundgrid Server Software. You can check the compatibility and requirements on the Waves website or in the user manuals of your products.



Make sure that you have followed the installation and setup instructions correctly for


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page